Bidet Toilet Seat 7/8" T-connector

Click to enlarge

This is the T-connector for a Bidet Toilet Seat that connects to the existing water line that supplies the water to your Bidet Toilet Seat. This T-connector connects to the underside of a 7/8" toilet tank male connection, like in the photo below.

All Toilet Tanks have this 7/8" male connection and this T-connector is much easier to install than the ½" T-connector on the wall valve and if you are looking for the ½" T-connector, this link will take you to the Bidet Toilet Seat 1/2" T-connector page.

They are very easy to install and this is all you need to do:

1.     Shut off the water valve to the toilet.

2.     Then flush the toilet to relive pressure from water line.

3.     Then check to make sure water is completely off and not running into the flush valve in the toilet tank.

4.     Loosen and remove the female end of the water hose leading into the underside of the toilet tank.

5.     Make sure that all connections have the proper gaskets.

6.     Now install the female end of the 7/8" T-connector to the male connection on the underside of the toilet tank and turn until sung and in most cases you can hand tighten these. (Please make sure that the flush valve inside of the toilet tank does not turn as you tighten, you may need to hold the flush valve while tighten the T-connector), if necessary use a wrench to complete the job.

7.     Now reconnect the female end of the water line to the bottom side of the male T-connector making sure you have a good sung fit.

8.     Now connect the ½" female water line for the Bidet Toilet Seat to the ½" male T-connector end and then connect the other end of the female ½" water line to the ½" male connection on the side of the Bidet Toilet Seat, making sure that all connections are tighten but not over tightened.

9.     First make sure all connections are dry, now slowly turn the water valve on and look for leaks and use some toilet paper to check for water. If you do have a leak, loosen the offending connection to make sure the gasket is in place and or no debris are obstructing the gasket.

Specifications for this Bidet Toilet Seat 7/8" T-connector:

• One female 7/8" connection and one gasket
• One male 7/8" connection
• One male ½" connection

The 7/8" T-connector in this photo may or may not look like the one you receive.